Aluminum Solar Panel Mounting Rail Clamp

Topfencesolar Aluminum Solar Panel Mounting Rail Clamp is a universal fixing module on the ground structures. It is the best choice to the current photovoltaic installation.

The height of its two sides are difference, shorter side will clamp on the side of rail to fix it on the long beam. Its main use is to fix the edge of the solar panel array. It is pressing panel modules tightly by pressing the panel frame, meanwhile it is preventing the edge of the photovoltaic module from tilting outward or shifting when subjected to external forces, thus ensuring the integrity of the entire photovoltaic array.  

(Please see below diagram drawing of the application of Universal Framed Module Fixing Clamps.)

Material is Al6005-T5 –Aluminum alloy has a low density about 2.7 g/cm³ but high strength. It has good ductility and can be proceed with different complex shapes. The processes such as extrusion and casting.

Especially after anodization processing, the Solar Mounting Rail Fix Clamp surface is easy to form a dense oxide film (Al₂O₃), which can resist corrosion from the atmosphere, rainwater, and weak acids and bases, making it suitable for long-term outdoor ground use.

Model: Pre-assemble

Accessory: SUS304 screw/ Galvanized Steel

Clamp Length of Aluminum Solar Panel Mounting Rail Clamp: 40mm (could be customized)

Wind Load: 60m/s

Snow Load: 1.4KN/M2

Application: Ground PV Solar Panel Installation

Module Orientation: Suit to both Horizontal and Vertical

Feature: Cost-effective and fast Installation

What Topfencesolar offers better service?

Loading Calculation Simulation: Topfencesolar offers professional loading calculation such as design load based on counting dead load, wind load calculation and snow load calculations. Those are the important factors to keep structure safe.

For other materials like as hot Dip Galvanized steel and Zinc-Aluminium-Magnesium materials.

This will be new trend for ground mounting.