Solar Energy in Saudi -- Solar&storage Live KSA 2025

Solar&Storage Live KSA 2025 exhibition is held from 12-14 oct. This time the exhibiton show the newest panels and inverters and storage and solar mount knowledges of indutry. Saudi Arabia is rich in oil resources. In recent years, due to the rise of new energy sources, the demand for solar has been increasing. As Saudi Arabia is one of the countries with  frequent sunlight in the world, In addition, there are a large number of available open deserts that can accommodate the infrastructure for solar energy projects. This makes Saudi Arabia an attractive location for the solar energy industry. The resources are astonishing; The land resources are abundant. The power transmission grid system is relatively new, highly flexible and capable of adapting to intermittent loads. Another important driver of solar energy deployment in Saudi Arabia is the astonishingly high per capita primary energy consumption, which is four times the global average. The total energy consumption of the Kingdom of Saudi Arabia is growing at a rapid rate of 6% annually, which also provides a strong reason for energy diversification. Despite its huge potential, the solar energy industry in Saudi Arabia is still in its early stages.

So the prospects for solar energy systems in Saudi Arabia are very good

Because it is in the early stage, a lot of professional knowledge about solar energy is still blank. So today, we will provide some explanations to customers on how to choose eye-lifting brackets.

If the client wants to choose some ground to install the project, mainly for some agricultural irrigation and planting some plants under the solar energy. As Saudi Arabia is a desert area, some supports with ground piles are used to support the system for some simple construction and to obtain more electricity with less land

There are also many installed on the rooftops of projects in Saudi Arabia. How to choose a roof system?

If the roof is a cement roof, then the matrix cement block method is the preferred choice. When the parapet walls around the roof are relatively low or even non-existent, Ballast Solar Panel Mounting are the preferred choice. This way, the installation cost and the cost of bracket materials can be saved.

If the roof is a steel tile roof, the choice should be based on the shape of the roof tiles.

There are many types of tile shapes involved. There is a T-shaped, Klip Lok Solar Mounting (including many types, I will show the detail later)and so on.

As for how to choose the professional solar mount, professional designers requires detailed tile shape data, as well as local conditions such as wind speed and Angle, to design a complete solar mounting system.And we will draw the CAD of the projecets and then bom and show you the best quotation.